 |
|
 |
| MBD-X6DHR-TG-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| |
|
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 82546GB
|
| SATA |
- ICH5R SATA 2-port Controller
- RAID 0, 1 support
|
| SATA |
- Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev C0, SATA Controller
- RAID 0, 1, JBOD support
|
| Zero-Channel RAID |
- Supports RAID 0, 1, 5, 10, JBOD
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
- (Card not included)
|
| IPMI |
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| |
|
| Serial ATA |
- Two ICH5R Serial ATA ports
- Four Marvell Serial ATA ports
- Up to Six SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
|
| Floppy |
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB dual internal headers supporting up to 2 USB ports
- USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports / 1 header
|
|
|
|
|
| 1U Chassis |
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
|
| PCI-Express / PCI-X |
- 2 PCI-Express (x8) slots
- 1 PCI-X 64-bit 133MHz slot
- 1 PCI-X 64-bit 100MHz slot
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- USB Keyboard Support
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
|
| FAN |
- Total of five 3-pin fan headers
- Status monitor for speed control
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU Thermal Trip Support
- Thermal Monitor 2 (TM2) Support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
|
|
