 |
 |
| SYS-5013C-MT |
- SuperServer 5013C-MT (Beige)
|
| SYS-5013C-MTB |
- SuperServer 5013C-MTB (Black)
|
 |
 |
| CPU |
 |
Single mPGA478 ZIF Sockets Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition) Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz Hyper-threading enabled |
 |
| System Bus |
 |
800 / 533 / 400MHz system bus |
 |
 |
 |
| Memory Capacity |
 |
Four 184-pin DIMM sockets Supports up to 4 GB of DDR400/333/266 memory Dual channel memory bus Memory must be populated in pairs |
 |
| Memory Type |
 |
DDR400/333/266 unbuffered ECC or non-ECC SDRAM, 184-pin gold-plated DIMMs |
 |
| DIMM Sizes |
 |
128MB, 256 MB, 512 MB, 1 GB |
 |
| Memory Voltage |
 |
2.5 V only |
 |
 |
 |
| Chipset |
 |
Intel® E7210 (Canterwood ES) chipset MCH + 6300ESB + FWH |
 |
| Serial ATA |
 |
Marvell® SATA Controller chip (4x Drive support) Six Serial ATA ports RAID 0, 10 Supported (for 4 HDD) RAID 0, 1 Supported (for 2 HDD) |
 |
| Network Controllers |
 |
1x Intel® 82547GI CSA Gigabit Ethernet Controller 1x Intel® 82541 Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
 |
| Graphics |
 |
ATI Rage XL SVGA PCI video controller with 8MB of video memory |
 |
 |
 |
| 1x full-height,
half-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot
(Riser card required) w/ VXB (Virtual Extended Bus) slot |
 |
 |
 |
| IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
 |
| Floppy |
 |
1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
| USB |
 |
2x USB 2.0 / 1.1 ports 1x USB header supports additional 2x USB 2.0 / 1.1 ports) |
 |
| Serial Ports |
 |
2x Fast UART 16550 serial ports |
 |
| VGA Port |
 |
1x VGA Port |
 |
| Parallel Port |
 |
1x ECP/EEP Parallel Port |
 |
| LAN Port |
 |
2x RJ45 Ports |
 |
| Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
|
 |
 |
 |
| Height |
 |
1.7" (43mm) |
 |
| Width |
 |
17.2" (437mm) |
 |
| Depth |
 |
19.8" (503mm) |
 |
| Gross Weight |
 |
38 lbs (17.2 kg) |
 |
| Available Colors |
 |
Beige, Black |
 |
 |
 |
| Buttons |
 |
Power On/Off button
System Reset button
|
 |
| LEDs |
 |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
|
 |
| Ports |
 |
2x Front USB Ports 1x Serial COM Port |
 |
 |
 |
| Hot-swap |
 |
4x 3.5" Hot-swap SATA drive bays |
 |
 |
 |
| CDROM |
 |
1x 24x TEAC CDROM Drive |
 |
 |
 |
| 1x SATA813 1U Backplane w/o SAF-TE |
 |
 |
 |
| Fans |
 |
3x 4cm 12,500 RPM Fan |
 |
| |
 |
Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 5 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
 |
 |
| CPU |
 |
Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
| FAN |
 |
Total of five 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control |
 |
| Temperature |
 |
Monitoring for CPU, chassis, environment CPU thermal trip support |
 |
| LED |
 |
CPU Overheat LED System Overheat LED +5V standby alert LED Suspend-state indicator LED |
 |
| Other Features |
 |
Chassis intrusion detection Chassis intrusion header |
 |
 |
 |
| BIOS Type |
 |
4Mb Flash EEPROM with AwardBIOS® |
 |
| BIOS Features |
 |
Plug and Play (PnP) APM 1.2 DMI 2.3 support PCI 2.3 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support |
 |
|