 |
 |
| SYS-6025C-URB
|
- SuperServer 6025C-URB
(Black)
|
| |
 |
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300
sequence (Harpertown /Clovertown processor) up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
- 1333 / 1066 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
 |
| Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
|
| SATA |
- Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
|
| Network Controllers |
- Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2 rear + 1 Type A connector + 2 headers (3 Ports)
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
|
| |
 |
| BIOS Type |
- 16Mb SPI Flash with Phoenix ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
 |
 |
 |
| Form Factor |
|
| Model |
|
| |
 |
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
25.5" (648mm) |
| Gross Weight |
55 lbs (24.9kg) |
| Available Colors |
Silver, Black |
| |
 |
| Buttons |
Power On/Off button
System Reset button
|
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Power fail LED
|
| Ports |
2x USB Ports + DB9 COM Port (optional) |
| |
| Left Side |
- 1 Universal I/O (UIO) Slot
- 3 (x8) PCI-E Slots (Full-height / Full-length)
|
| |
 |
| Hot-swap |
- 8x 3.5"SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
| |
 |
| DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy |
Slim 1.44MB Floppy Drive (Optional) |
| |
 |
| 1x 2U SATA backplane |
| |
 |
| Fans |
|
| Shroud |
|
| |
 |
| 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 60-50Hz, 10 - 4 Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
| |
 |
| CPU |
- Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
- UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
| |
 |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|