|
|
 |
 |
|
|
 |
| 28 FAQs Found |
|
|
Question |
Date |
| 1 |
I want to order your C2SBC-Q mainboard which has three onboard serial port headers. Are the cables included, and if they are optional, what is the part number?
|
10/25/08 |
| 2 |
I am looking for Super Doctor III for your X5DPL main board. Where is this file located? |
10/11/08 |
| 3 |
I have a Super Micro X7DB3 running Windows 2008 Enterprise x64 with SP1. I get an error “Base system Device” in the device manager. I was told to re-run the Intel chipset with no success. How can I resolve this issue? |
10/11/08 |
| 4 |
I have found that when you upgrade from BIOS 1.1 to 1.1a for your C2SBA motherboard. Windows shows an unknown device call “LPC ATA” in Windows XP device manager. This device is not present with the 1.1 BIOS. There is no driver on the CD that makes it go away either? |
10/10/08 |
| 5 |
After reading the user manual for the X7DWN+ motherboard we are confused to whether or not we can mix different sizes of RAM modules and if we can, what is the proper way of doing it? |
10/10/08 |
| 6 |
I have your X7DWN+ motherboard with AOC-USASLP-S8iR controller. I can go into the RAID BIOS setup and then when I enter the Host Raid Controller configuration setup the screen goes black. I had try two different AOC-USASLP-S8iR raid controller but still had same problem. What could be the issue? |
10/10/08 |
| 7 |
We want to use a VGA card on your X7SBE, but it already has on onboard graphic adapter. Does this motherboard support PCI video adapters? |
10/10/08 |
| 8 |
We have been using your C2SBA+(II) main board for sometime now without issue. On the new set of boards we have received we always get a blue screen during Windows installation.
I found the FAQ on your website saying you need to also add the ITE driver to overcome this issue, but we do this already as before, but the blue screen still happens, what could be the issue? |
10/10/08 |
| 9 |
Recently, we found Your LAN will malfunction after several system reboots. The LAN device in Windows Device Manager will show "!" with yellow mark. Listed below is the complete system configuration. What could be the issue?
the following are system basic configuration,
please let me know any solution for this symptom.
X7DBR-E /PCB Rev1.1 /BIOS R2.1
CPU: Xeon5160 SLAG9 x2pcs
Memory: DDR2-667 FB-DIMM 1GB x4pcs
IPMI: SIMSO+ PCB3.00 Firmware1.57
OS:Windows XP SP2 32bit
LAN Driver: v13.0 |
10/09/08 |
| 10 |
We noticed there are LE4 & LE5 on X7DVL-L board, about the onboard POST code LED indicators. What are their function? |
10/09/08 |
|
|
|
|
|
Support Home
Online Support